IVAC PV500 Vacuum System - Industrial Vacuum Systems

IVAC PV500 Vacuum System - Industrial Vacuum Systems Introduction

IVAC Industrial Vacuum Units for All-Purpose Pumping Solutions. The PV500 is our deluxe sand, sump, rock, slurry, and water handling industrial vacuum system. PV500 Industrial Vacuum Unit PUMPS THE UNPUMPABLE Manufacture Date: 2019 - Skid Mounted c/w forklift lift points. - The PV500 Vacuum unit cycles from vacuum to discharge when the pressure vessel is filled with the material being vacuumed. - This is set by the operator on a timer located in the control box. - Overfilling will not damage the unit. - Material being vacuumed does not come in contact with any moving parts. Handles wet or dry material, sludges, slurries, sand, gravel, and rock. - Battery is good for approximately one-month continuous operation before recharge. - Virtually maintenance free as there are only three moving parts (knife, gate, valves). - There are no filters to clean or replace. - Pumping up vertically over a typical pump 28/8.5m feet is easily achieved with our vertical lift assistant. Over 200 feet/60m vertical lifts achieved. - Discharge material Miles/Kilometers away with our fully adjustable powerful discharge circuit. Compressed air can be wyed in anywhere down the line to “Boost” even further.