BRAND NEW FLASHFORGE 3D PRINTER Introduction
Getting started in 3D printing with Finder is much easier and much more affordable than ever. It is capable of printing right out of the box with few tweaks.
Finder features an intuitive calibration detection system to assist in leveling. You are directed to tighten or loosen the leveling screws until the beeps sound, then it detects the distance between nozzle and build plate to verify whether your leveling is completed. Leveling instruction will be shown on the touchscreen display.
Finder 2.0 adopts an extractable platform, thus it is easy to remove models, and it will not damage the platform or holder when removing the model.
All the heated elements are protected from touch, and the printing filament is non-toxic PLA. Finder is the perfect starter 3D printer for families, schools as well as novice users.
It is fully assembled. And now with its assisted leveling system, you just need to do very few tweaks before starting to print. Featured with a 3.5-inch touchscreen, filament-run-out detection, USB stick and Wi-Fi connectivity and more, it becomes an even more friendly 3d printer for beginners.
Finder is designed for kids and novices. We hope you can have a blast with this safe 3D printer making practical things to wildly imaginative creations. We conceal all the cables within the plastic alloy body. The frame is sleek, without any sharp edges. The hot nozzle is protected from touch, and the build plate is a piece of glass with no heat on it.
It supports previewing the printing files. And the file name will appear with the model appearance. It does not need to worry about too many files in the printer because of 8 GB internal storage.
With a simple and intuitive interface and a list of preset parameters for printing, FlashPrint enables you to enter the wonderful world of 3D printing more easily. Featured with smart support, 2D into 3D, split model and more, it is a functional slicing software to achieve more possibilities.
The cloud platform can store user models. After binding devices, Online cloud slicing, remote printing status viewing, easy to control the printer.
Extruder Quantity1
Nozzle Diameter0.4 mm
Maximum Extruder Temperature240 ℃ (464 ℉)
Print Speed30-100 mm/s
Filament CompatibilityPLA, Wood, TPU 95A
Filament Diameter1.75mm (0.069 IN)
Print Volume140*140*140 mm(5.5*5.5*5.5IN)
Layer Thickness0.1-0.4 mm
Print Precision±0.2 mm
Printer Dimension420*420*420 mm (16.5*16.5*16.5 IN)
Screen3.5-inch touch screen
Net Weight11 kg (24.3 LBS)
Gross Weight13.8kg (30.4 LBS)
Internal Storage8 G
Running Noise50 dB
Working Environment15-30 ℃ (59-86 ℉)
Power InputAC 100-240 V, 47-63 Hz
Power65 W
Power Output24 V, 2.71 A
ConnectivityUSB cable, USB stick, Wi-Fi, Ethernet, FlashCloud, PolarCloud
SoftwareFlashPrint
File Input Format3MF / STL / OBJ / FPP / BMP / PNG / JPG / JPEG files
File Output FormatGX/G
