AVYCON ANCP3005Q Professional Wi-Fi CPE Network Bridge brand-new

AVYCON ANCP3005Q Professional Wi-Fi CPE Network Bridge brand-new Introduction

Brand-new, sealed, only half of price of Amazon, or the other online sales. Location, Somerset, southwest of Calgary, price firm, FCFS, thanks. About Product AIVO Network's ANCP3005Q is a professional Wi-Fi communication device, which enables connection from existing LAN to remote location using the latest wireless technology. We strongly recommend professional installation. Professional Wi-Fi CPE Network Bridge, Qualcomm Chipset, Indoor/Outdoor, 5.8GHz Frequency, 48V POE Power Supply(Included), Long range transmission up to 6+miles, IEEE802.11 a/an, High Power Output up to 23dBm Functions - High Power Indoor/Outdoor CPE with Qualcomm Atheros Chipset - Range up to 6 miles away with line of sight - Can be used to connect remote IP cameras to existing NVR’s / DVR’s - Supports up to 300Mbps - Utilizes the 5.8Ghz Wi-Fi frequency, avoiding the congested 2.4Ghz bandwidth in use on most Wi-Fi today. - Dual 14dBi antennas - Supports the following operation modes: Bridge, Access Point, Router and Repeater - Supports providing PoE power to a single IP camera attached to CPE - Includes 48V PoE power injector which allows for powering CPE from up to 330ft. away - LEDs provide information about system status and signal strength for alignment in Bridge mode - Hardware Reset button - Outdoor Rated down to -40°F - Supports Pole, Wall or Rack Mounting General CPU Qualcomm AR9344 560Mhz CPU SE2576L PA Chipset - 64MB DDR2 / 16MB SPI Antenna Integrated Dual 14 dBi Antennas Wi-Fi Standards IEEE802.11a/an Security WPA, WPA2-AES or WPA2-PSK RF Output Power 200mW (23dBm) RF Sensitivity -96dBm RF Frequency 802.11a/n: 5.180Ghz - 5.825Ghz Bandwidth 300Mbps Physical Ports 1 x 10/100 Mbps WAN Ethernet Port 1 x 10/100 Mbps LAN Ethernet Port 1 x Toggle switch for PoE output for IPC 1 x Reset Button Ingress Protection IP66 LED Indicators Power / WAN / LAN / Wi-Fi Level Signal Strength Power PoE 802.3at/af Adapter: 48V PoE Power Adapter Power Consumption <8W Installation Methods Pole Mounting, Wall Mounting or Rack Mounting Product Dimensions 10.2” x 3.1” x 2.1” (262mm x 80mm x 53mm) Net Weight 0.7lbs Working Environment -40°F ~ 131°F / 10% ~ 90% RH, Non-condensing Storage Environment -58°F ~ 167°F / 5% ~ 90% RH, Non-condensing