FIIO R7 DESKTOP DIGITAL STREAMING MUSIC PLAYER AND DAC/AMP Introduction
FIIO R7 DESKTOP DIGITAL STREAMING MUSIC PLAYER AND DAC/AMP
Building a desktop HiFi system has always been full of compromises. Stacking various brands of equipment together makes it to hard have an elegant and compact setup. For streaming media, such a setup usually brings an unacceptable experience.But now there is a new solution.
The FiiO HiFi desktop experience version 1.0 is now available. With the R7 serving as the centerpiece, and backed by the SP3 speakers and FT3 headphones, You will experience a consistent and highly enjoyable audio and visual device. Welcome to a new era of a slick desktop HiFi experience!
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Name/model: R7
Hardware solution: Soc: Snapdragon 660, DAC: ES9068AS, AMP: THX AAA-788+ * 2, USB: Snapdragon 660
Working mode: Android mode/Pure music mode/USB DAC mode/Bluetooth receiving mode/AirPlay mode/COAX mode/OPT mode/Roon Ready
Color: Black:
Weight: ≈1282g
Dimension: ≈110x134x160mm:
Volume control: Knob
Screen: 4.97 inches (720 * 1280) full-fit screen:
Internal storage/Free space (ROM): 64GB/≈46GB
RAM: 4GB:
Gain: Ultra high/Super high/High/Medium/Low
Memory card: Single SD card expansion, theoretically supports up to 2TB
Recommended headphone impedance:
PO: 16 ~ 150Ω
BAL: 16 ~ 300Ω
Channel balance: L20~ R20 (0.5dB per level)
BUTTONS AND PORTS:
Button: Volume knob (it has button's function)*1 Output selection knob (similar to button's function)*1
USB:
Type-C (USB3.0) * 1
USB A (USB2.0) * 1 (data transfer)
DC power in port: Φ 6.2mm DC socket
Toggle switch: DC/AC switch
Balanced output ports:
Standard 4.4mm * 1
4-cores XLR * 1
Phone out port: Standard 6.35mm
Balanced line out ports: 3-cores XLR * 2
Single-ended line out ports: RCA* 2
OPT input port: Standard TOSLINK
COAX input port: RCA
OPT output port: Standard TOSLINK
COAX output port: RCA
Network port: 100M Ethernet port
FEATURES:
WiFi: 2.4GHz/5GHz, DLNA, AirPlay, WiFi music transmission,Roon Ready etc.:
Bluetooth Emission (5.0): AAC/SBC/aptX/aptX HD/LDAC/LHDC
Bluetooth receiving (5.0): SBC/AAC/LDAC:
FiiO Link: WiFi and Bluetooth control for Android, WiFi control for iOS.
MQA: 8x decoding
All to DSD: √
Max sampling rates:
USB DAC: 384kHz/32bit; DSD256 (Native)
Local decoding: 384kHz/32bit; DSD256 (Native)
USB Audio: 768kHz/32bit;DSD512（DoP/D2P/Native)
COAX IN: 192kHz/24bit
OPT IN: 96kHz/24bit
COAX OUT: 384kHz/24bit; DSD128 (DOP)
OPT OUT: 192kHz/24bit
Bluetooth codec indicator (knob light):
Blue: SBC
Cyan: AAC
Yellow: aptX HD
White: LDAC
Orange: LHDC
EQ: 10-segment dynamic EQ (±12dB), 8 preset EQ, custom EQ,PEQ supported.
Operation modes: Support gesture operation, two-button navigation, three-button navigation
Sampling rate indicator(knob light):
Blue: lossy
Cyan: SQ
Yellow: HR
Green: DSD
Magenta: MQA
Screen saver: √
Firmware upgrade: √ Local upgrade, OTA upgrade
Double-click to wake up: √
POWER PARAMETERS:
Power supply: DC 12V/3A OR AC 100-240V~ 50/60Hz
AUDIO PARAMETERS:
Phone out performance parameters (6.35mm, USB DAC/OPT/COAX, Ultra high)
Output power:
L+R≥1850mW+1850mW (16Ω,THD+N<1%)
L+R≥1250mW+1250mW (32Ω,THD+N<1%)
L+R≥160mW+160mW (300Ω,THD+N<1%)
Output impedance: < 0.5Ω
Crosstalk: ≥77dB
Peak voltage: 18Vp-p
SNR: ≥ 124dB (dbA):
THD+N: < 0.0005% (1kHz / -8dB@32 Ω)
Frequency response:
5Hz~ 50kHz: attenuation < 1dB
20Hz~ 20KHz: attenuation < 0.3dB
Noise floor: < 4uV (dbA)
Phone out performance parameters (6.35mm, USB DAC/OPT/COAX, Super high)
Output power: L+R≥1450mW +1450mW(16Ω,THD+N<1%)
L+R≥750mW +750mW(32Ω,THD+N<1%)
L+R≥80mW+80mW (300Ω,THD+N<1%)
Crosstalk: ≥73dB
Peak voltage: 14Vp-p
Output impedance: < 0.4Ω
SNR: ≥ 124dB (dbA)
THD+N: < 0.0005% (1kHz / -6dB@32 Ω)
Noise floor: < 4uV (dbA)
Frequency response: 20Hz~ 80kHz: attenuation < 1dB
20Hz~ 20KHz: attenuation < 0.3dB
Line out performance parameters (RCA, USB DAC/OPT/COAX)
THD+N: <0.0005%(1kHz/-0dB@10KΩ)
SNR: ≥ 118.5dB (dbA)
Crosstalk: ≥112dB
Noise floor: < 2.7uV (dbA)
Frequency response:
5Hz~ 80kHz: attenuation < 2dB
20Hz~ 20KHz: attenuation < 0.1dB
Line out level: 2.2Vrms
Balanced phone out performance parameters (XLR4/4.4mm, USB DAC/OPT/COAX, Ultra high)
Output power:
L+R≥1000mW+1000mW (16Ω,THD+N<1%)
L+R≥3650mW+3650mW (32Ω,THD+N<1%)
L+R≥630mW+630mW (300Ω,THD+N<1%)
Output impedance: < 0.5Ω
Crosstalk: ≥116dB
Peak voltage: 39Vp-p
SNR: ≥ 122dB (dbA)
THD+N: < 0.0005% (1kHz / -8dB@32 Ω)
Noise floor: < 7.5uV (dbA)
Frequency response:
20Hz~ 50kHz: attenuation < 2dB
20Hz~ 20KHz: attenuation < 0.3dB
Balanced phone out performance parameters (XLR4/4.4mm, USB DAC/OPT/COAX, Super high)
Output power:
L+R≥800mW+800mW (16Ω,THD+N<1%)
L+R≥3000mW +3000mW(32Ω,THD+N<1%)
L+R≥320mW+320mW (300Ω,THD+N<1%)
Output impedance: < 0.5Ω
Crosstalk: ≥116dB
Peak voltage: 27.7Vp-p
SNR: ≥ 122dB (dbA)
THD+N: < 0.00048% (1kHz / -6dB@32 Ω)
Noise floor: < 7.5uV (dbA)
Frequency response: 5Hz~ 80kHz: attenuation < 2dB
20Hz~ 20KHz: attenuation < 0.3dB
Balanced line out performance parameters (XLR3, USB DAC/OPT/COAX)
THD+N: <0.0005%(1kHz/0dB@10KΩ)
SNR: ≥ 125dB (dbA)
Crosstalk: ≥121dB
Noise floor: < 2.5uV (dbA)
Frequency response: 20Hz~ 50kHz: attenuation < 2dBl
20Hz~ 20KHz: attenuation < 0.1dB
Line out level: 4.5Vrms
